Concept: PIR Switch for energy saving/security applications

It is said that necessity is the mother of all inventions. This is one such product that evolved based on one of our internal needs.

To save energy in our lab where several 36W lights glow most of the time when nobody is using the lab. Considering the work at lab, it would be a difficult proposition to ask the people working in the lab to switch off lights when not in use. So we designed our own PIR sensor based Switch that switches off lighting when nobody is around. Also, when someone enters the room the lights come up again.

PIR sensors rely on changes in passive infra-red light received to determine presence or non-presence of people. This combined with a controller/timer to switch off light after the preset duration of non-activity and to switch on the lights when someone enters the room solved the problem!

There are many designs of such products available in the market with different cost and features.

Issues with PIR sensors:
Like all optical sensors, Sunlight can play havoc with it and make it generate false positives. After some due exploration we found a technique to eliminate false positives from the sensors and make it work. So our prototype works very well compared to the raw sensor signals. It avoids false triggers when used indoors despite sunlight peering in from Windows/doors.

Outdoor applications?
As much as we would love to have an outdoor version of this, sunlight plays havoc with the sensor. However these sensors can be used for night time applications of security/monitoring of any movement/people inside a compound/perimeter.

To know more about the product, visit our website and check out the 'Activities' link on the left side. 

We are in the process of turning it into a formal product. For any product/design enquiries, you can get in touch with us. Contact info at our website: http://www.ideas-unlimited.in

Robot designed by SJCE students with lab support from Ideas Unlimited...

This robot along with another matrix navigating robot was designed by students from the Mechanical and Instrumentation Departments of SJCE, Mysore (Sri Jayachamarajendra College of Engineering, Mysore) for a robotic contest at IIT Mumbai. The students developed two robots as part of this contest. Ideas Unlimited allowed these students to use the lab facilities at our premises for their activities.

Gripper Construction:
One the key elements on this robot was the construction of gripper. The gripper was constructed using ordinarily available aluminum channels and hand tools for cutting/drilling them. the gripper claw was put together using blind rivets. (Ingenious technique using available off-the-shelf material). The gripping portion of these parts were lined with rubber to ensure adequate grip is available on any material the claws may hold.

Disclaimer: Ideas Unlimited was not involved technically in making of these robots. At that point of time when these robots were built by the students of SJCE, Mysore, due to legal obligations Ideas Unlimited consciously avoided getting involved in any aspect of this robot development. Funding for the project was done by Sri Jayachamarajendra College of Engineering, Mysore.

However Ideas Unlimited due to its association with Sri Jayachamarajendra College of Engineering, provided the lab area and lab test and measurement equipment, mechanical tools, and equipment  for doing the necessary mechanical, electronic fabrication and software programming devices to these students.

The team:
The design of this remote driven robot is owned by the following students of SJCE, Mysore:

Vinod T S   Mechanical

Chaitra R Instrumentation

Preetham T S Instrumentation

Chaitra V Instrumentation

Sreenivas R Instrumentation

In one of the future posts, we will post about the matrix navigating robot made by the same students using line-follower technique.

e-thumb: Electronic Thumb-wheel Switch concept from Ideas Unlimited...

Eventually when made into product form, this prototype will be tiny electronic-thumb-wheel switch module that can be mounted on a panel. The device uses a 5X7 dot-matrix LED display. It uses EEPROM to store the chosen setting. Video below demonstrates how the switch mimics a mechanical thumb-wheel switch.

Applications:
1. Industrial applications to replace mechanical thumb-wheel switches with bright and visible displays.
2. In-flight/In-Automobile (Commercial) entertainment system - can display currently chosen channel number etc. (Software can also be adapted to scroll additional text if required.)
3.Panel meters to display any slow changing parameters. (Including automotive).

For any further queries or general interest on this technology, e-mail us.

GLONASS Navigation modules from Geostar Navigation Design Bureau

(Technical information republished with permission from the company that makes these modules.)

Following up on from the earlier post on different navigation systems,this post talks specifically about commercially available and off-the-shelf GLONASS based modules that are just becoming available in the market.  'Geo-Star Navigation Design Bureau' has a host of GLONASS/GPS Hybrid modules. Instead of competing with GPS system, these modules use both GLONASS and GSM signals and the module vendors claim to achieve accuracies of under '3 meters'! 

As mentioned in the earlier post about different navigation systems around the world, the GLONASS system was designed to be compatible with GPS, Galileo and Compass Navigation systems, so a GLONASS module can get the best from every navigation system available.

A wide variety of modules for different applications and casing options including a SMD module GeOS-1M that is 33 X 35mm. Geo-Star also provides Demo-Kits for developers who want to adapt/try out the modules.

Ideas Unlimited is in the process of evaluating GLONASS modules for a specific area of Navigation application which could use high accuracy.

If you require any further technical information about the modules, do get in touch with Geo-Star Navigation by e-mail. If you require any kind of evaluation or development/development support on these modules, you can contact Ideas Unlimited by e-mail.