Monday, May 7, 2018

Functional Miniature simulator developed at Ideas Unlimited, Mysuru

We have developed a miniature table top simulator for an MNC customer of ours. Nature of this project cannot be fully disclosed due to agreements with customer.

The simulator contained 4 cities, a highway and the works (including street lights, petrol bunk, water tank etc.) Street lights, lights within buildings switched on!
However we can showcase many of the miniature barely 1 inch tall models we developed as part of this miniature simulation system.

Everything can be digitally controlled using hardware below the simulator! It also had two digital displays disguised as bill boards to show state of the simulator and its components etc. 

Picture of the simulator partially constructed and its electrical systems and wiring getting tested

The electronics that control the entire simulator, designed and developed by Ideas Unlimited, Mysuru
Simulator fabrication near complete. Ready to be painted/final finished.

For more pictures, videos and details of this simulator, visit our website link...

http://www.ideas-unlimited.in/techsimulator.html

:-)

Thursday, April 19, 2018

Properietary Lightweight and extensible IOT stack (Hardware, Middleware and Software) solution.


Ideas Unlimited has till date worked on several IOT designs and products for third parties and customers. We cannot reveal every single IOT product/project we worked on due to NDAs and Agreements with customers. We have worked on close to five IOT related technologies/products till now.

Proprietary end to end IOT Stack to support iBotics platform of Sensital




Proprietary IOT Hardware/Software (Full stack) developed by Ideas Unlimited for Sensital.
However, this particular development we did for a Customer Sensital (www.sensital.com - External Link) was interesting!  (And details reproduced here with due permission from our customer).


This framework prototypes supported WiFi as ZIgbee based IOT Nodes! Further, it could be modified to use a GSM Module as well if required for really remote applications where setting up WiFi or Zigbee networks is not feasible! 
A Zigbee to Wifi bridge device to interface the Zigbee Controller - and nodes attached to it to Internet
This framework was developed for the Australian company SENSITAL (www.sensital.com) to complement their iBOTics platform. This Framework we developed is a proprietary IOT framework developed from the scratch using open source Atmel ARM 32 bit controller based hardware (ATSAM3X8E on top of Arduino Due) and our own proprietary software stack mostly using open source software and TCP/IP. The later versions will have only the ATSAM3X8E 32-Bit Arm controller with its own PCB for hardware and extension headers to interface to sensors and systems.

For more details about this IOT Framework we developed, visit our website page...
http://www.ideas-unlimited.in/techiot.html


To know more about this tech, you can contact:
enquiry@sensital.com
info@ideas-unlimited.in



















Sunday, April 15, 2018

Blue tooth enabled Full Color Persistence of Vision (POV) Device developed for RevEngg, a Startup in Mysuru

We were approached by a group of students in sixth semester BE a while ago, who had founded their own startup company REVENGG (External Link www.revengg.com) to help build a product called "Blue Tooth enabled Multi-colored Persistence of Vision Device".

The product uses persistence of vision to display text/graphics in full color using just 20 RGB illuminators on a rotating arm! Best part, you can use a mobile app to beam messages to be displayed using Blue tooth to it!

The products displays a surreal text as if it is floating in mid-air!

See the video demo of the Blue tooth enabled RGB colored Persistence of Vision device:

The product finds application in advertising, marketing and other display and signage related applications.

For any inquiries related to this product/technologies you can e-mail any of the e-mail ids below:


revengg15@gmail.com
info@ideas-unlimited.in

For full details of the product, visit link on our website:
http://www.ideas-unlimited.in/techpov.html


Thursday, April 12, 2018

15-Dec-2017: Ideas Unlimited signs MOU with JSS University for joint development of medical devices and hospital equipments.


Dated news: (15-Dec-2017): Ideas Unlimited, Mysuru and JSS University Mysuru (Link - External Link) signed an MOU for joint exploaration of possibilities to build Medical devices and Hosptial use equipments.

JSS University, Mysuru
JSS University is one of the top Medical universities in Mysuru area and run by Sutturu Matha.


Neonatal FeedRail Device developed into a product form by Ideas Unlimited, Mysuru.
Earlier, Ideas Unlimited had developed Neonatal Feedrail a product development initiative - sponsored by JSS University.  We have since then developed on Neonatal feedrail further and currently undergoing Clinical Trials at JSS University and Hospital.

Follow this link on our website to learn more about this Feedrail product.
http://www.ideas-unlimited.in/techfeedrail.html

Video of the first trials on a dummy baby at JSS Hospital, Mysuru:




Tuesday, April 10, 2018

23-Jun-2017: Ideas Unlimited wins MSME Innovation Award (Technology Adoption) from FKCCI


Dated News: 23-Jun-2017

Ideas Unlimited was awarded MSME Innovation Excellence Award (Technology Adaption category) from FKCCI (Federation of Karnataka Chamber of Commerce and Industry), a more than 100 year old trade body of Karnataka state in India.


 


One of the key technologies that impressed the jury was the Neonatal Feedrail we had developed for JSS University, Mysuru apart from the host of other technologies we developed.


You can learn more about the Neonatal Feedrail application by following this link... to our website here. 

Monday, April 9, 2018

10-Oct-2016: Ideas Manufacturing Mysore Pvt ltd, Our factory signed MOU with Palo Alto based Suitable Technologies for Service/Mfg of BEAM Telepresence robots/

Beam Telepresence Robots - Various Models supported in India by Ideas Manufacturing Mysore Private Limited.

Dated News: 10-Oct-2016: Our Factory - Ideas Manufacturing Mysore Pvt Ltd, signed MOU with Palo Alto, USA based Suitable Technologies Inc for servicing/manufacturing of Beam Telepresence robots in India.

(Since we had not updated website for 3 years, we are posting key updates of last 2-3 years one by one).
Beam Telepresence robots featured in Last season of Hit TV Game Show
"KAUN BANEGA CROREPATHI" for Phone a Friend!

Ideas Manufacturing Mysore Pvt Ltd website: http://www.ideasmfg.in 
Suitable Technologies Inc, USA website: https://www.suitabletech.com/

Suitable Technologies makes Beam Telepresence robots, and these robots have been available in India since 2016.  Ideas Manufacturing Mysore Pvt Ltd is the service/mfg partner for the Beams sold in India because of our expertise in Robotic Technologies. (Since we had not updated website for 3 years, we are posting key updates of last 2-3 years one by one).

For any BEAM Telepresence related queries in India contact info@ideasmfg.in

Functional Miniature simulator developed at Ideas Unlimited, Mysuru

We have developed a miniature table top simulator for an MNC customer of ours. Nature of this project cannot be fully disclosed due to agre...